Copying Functions
ADVANCED OPERATION GUIDE 1-47
1
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the
loaded paper matches but the orientations are different. The images will be
rotated 90° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto
Image Rotation on page 6-31.
The procedure for making copies using Auto Image Rotation is explained
below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Advanced Setup] and then [Auto Image Rotation].
4
Press [On] to select
Auto Image
Rotation.
5
Press [OK].
6
Press the Start key to start copying.
Status 10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Auto Image Rotation
Press [OK] to display
Add Shortc ut
Off
When ori gi nal and paper sourc e s i z e are the
same, but their orientation is different,
rotate image 90 degrees when copying .
On
1
the image.
To Next Page
Loading...
Need help?
General
