Utax CD 1325 User Manual

Copying Functions
1-22 ADVANCED OPERATION GUIDE
3
Press [2 in 1] or [4 in
1], and choose the
page layout of
Layout.
4
Press [Border Line] to choose the type of the lines to indicate page
boundaries. Press [OK].
5
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
6
Press [OK].
7
Place the originals and press the Start key.
If the original is placed on the platen, replace the original and press the
Start key.
After scanning all originals, press [Scan finish] to start copying.
Status 10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Combine
Press [OK] to display
Add Shortc ut
Layout
4 in 1
2 in 1
Left then
Down
Top Edge Top
Original
Orientation
Off
None
Border Line
Down then
Right
Down then
Left
Right then
Down
1
the image.

Utax CD 1325 Specifications

General

Brand	Utax
Model	CD 1325
Category	All in One Printer
Language	English