System Menu
ADVANCED OPERATION GUIDE 6-35
6
High Comp. PDF Image
Select the default High Comp.
This setting is only displayed when the optional PDF upgrade kit has been
used.
The table below shows the available settings.
Use the procedure below to select the default quality setting for highly
compressed PDF files.
1
Press the System Menu key.
2
Press [Common Settings] and [Next] of Function Defaults. Press [T] twice
and [Change] of High Comp. PDF Image.
3
Select the default for
[Compression Ratio
Priority], [Standard],
or [Quality Priority].
4
Press [OK].
Repeat Copying
Select the Repeat Copy default. The options are as follows. The table
below shows the available settings.
Item Description
Compression Ratio
Priority
Compression Ratio is given priority with
smaller file size.
Standard Standard quality
Quality Priority Image quality is given priority with larger file
size.
Common Sett ings - High Com p . PDF Image
Cancel OK
Status 10/10/2007 10:10
Set the default compressed PDF quality level.
Higher quality will make the stored files larger.
Standard
Compression
Ratio Priority
Quality
Priority
Item Description
Off No Repeat Copy is performed.
On Repeat Copy is performed.
To Next Page
Loading...
Need help?
General
