Copying Functions
1-4 ADVANCED OPERATION GUIDE
Paper Selection
Select the paper source that contains the required paper size.
NOTE: Specify in advance the size and type of the paper loaded in the
cassette (refer to Original/Paper Setup on page 6-6).
Selecting the Cassette
Use the procedure below to select the paper supply cassette.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Org./Paper/Finishing] and then [Paper Selection].
4
Press the key of the paper source corresponding to the required paper
size. The cassette in which the paper is loaded is selected.
If [Auto] is selected,
the paper matching
the size of the
original is selected
automatically.
5
Press [OK].
6
Press the Start key to start copying.
Status 10/10/2007 10:10
Ready to copy.
Press [OK] to display
Copies
Add Shortc ut Canc el OK
Paper Selection
Auto
MP Tray
Setting
Letter
Plain
Letter
Plain
Ledger
Plain
Letter
Plain
Plain
1
Original
Zoom
Send
100%
---
:
:
:
---
the image.
Letter
To Next Page
Loading...
