Copying Functions
ADVANCED OPERATION GUIDE 1-55
1
5
Place the originals in the document processor or on the platen. Press the
Start key to start copying and register this job as a Repeat Copy job.
Outputting Repeat Copy Jobs
The Repeat Copy jobs are stored in the Document Box. Refer to Job
Box on page 4-2 to print out the Repeat Copy jobs.
Maximum Number of Repeat Copy Jobs Retained
You can use the procedure below to change the maximum number of copy
jobs that can be retained in the document box.
Use the procedure below to change the maximum number of copy jobs
retained.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory] and then [Next] of Job Box.
3
Press [Change] of Repeat Copy Job Retention.
4
Use the [+] or [-] key
to enter the
maximum retention
number.
You can also enter
the number from the
number keypad.
A number between 0
and 50 can be
entered as the
number of retained
jobs.
NOTE: If you enter a value of 0 (zero), you cannot use the Repeat Copy
function.
5
Press [OK].
6
When exiting, press the Close key repeatedly to return to the System
Menu default screen.
Status
10/10/2007 10:10
Document Box /Removable Memory - Repeat Copy Job Retention
Cancel OK
Set t he maxim um number of repeat c opy jobs t o retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any repeat copy jobs.
(0 - 50)
job(s )
1
To Next Page
Loading...
Need help?
General
