System Menu
ADVANCED OPERATION GUIDE 6-73
6
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings
and return to the default setting.
NOTE: Refer to page 6-21 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Auto Panel Reset.
3
Press [Off] or [On].
4
Press [OK].
Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait
before Auto Panel Reset. Options are between 5 and 495 seconds (every
five seconds).
NOTE: If you select [Off] for Auto Panel Reset, the time display does not
appear.
Use the procedure below to set the reset time.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Reset Timer.
Dat e /T imer - Aut o Panel Res et
Cancel OK
Status 10/10/2007 10:10
Automatically reset settings and return to
default s creen.
On
Off
To Next Page
Loading...
Need help?
General
