Sending Functions
ADVANCED OPERATION GUIDE 2-19
2
File Separation
Create several files by dividing scanned original data page by page, and
send the files.
Use the procedure below to split scanned original data into separate files
when sending scanned originals.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Type of Original/Transmission] and then [File Separation].
4
Press [Each Page]
to set File
Separation.
5
Press [OK].
6
Specify the destination, and press the Start key. The scanned original is
sent after being divided into files of one page each. Three-digit serial
number such as abc_001.pdf, abc_002.pdf... is attached to the end of the
file name.
Status 10/10/2007 10:10
Ready to send.
Destination
Add Shortc ut
Creat e and s end a file f or each page
of the original that was read.
Cancel OK
Eac h Page
File Separation
Place original.
Off
1
Press [OK] to display
the image.
To Next Page
Loading...
