Utax CD 1325 User Manual

Copying Functions
1-34 ADVANCED OPERATION GUIDE
3
Select the desired
Duplex mode.
4
If you choose [1-sided>>2-sided], [2-sided>>2-sided] or [Book>>2-sided],
select the binding edge of the finished copies in Finishing.
5
If you choose [2-
sided>>2-sided], [2-
sided>>1-sided],
[Book>>1-sided] or
[Book>>2-sided],
select the binding
edge of the originals
in Original.
6
Press [Original Orientation] to select orientation of the originals, either [Top
Edge Top] or [Top Edge Left]. Then press [OK].
7
Press [OK].
8
Place the originals in the document processor or on the platen and press
the Start key.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
Status
10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Duplex
Press [OK] to display
Add Shortc ut
Book
>>2-sided
1-s ided
>>2-sided
Top Edge Top
Original
Orientation
1-s ided
>>1-sided
2-s ided
>>2-sided
Finishing
Binding
Left/Right
Binding
Top
2-s ided
>>1-sided
Book
>>1-sided
1
the image.
Status
10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Duplex
Press [OK] to display
Add Shortc ut
Book
>>2-sided
1-s ided
>>2-sided
Top Edge Top
Original
Orientation
1-s ided
>>1-sided
2-s ided
>>2-sided
Original
Binding
Left/Right
Binding
Top
2-s ided
>>1-sided
Book
>>1-sided
1
the image.

Utax CD 1325 Specifications

General

Brand	Utax
Model	CD 1325
Category	All in One Printer
Language	English