Utax CD 1325 User Manual

System Menu
6-14 ADVANCED OPERATION GUIDE
3
Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to
disable automatic
detection or [On] to
enable automatic
detection of Folio
and 11x15"
respectively.
4
Press [OK].
Media for Auto Selection
Select a default media type for auto paper selection when [Auto] is
selected of Paper Selection. If Plain is selected, the paper source with plain
paper loaded in the specific size is selected. Select [All Media Type] for the
paper source with any kind of paper loaded in the specific size.
Use the procedure below to select the paper size and media type used by
Auto Selection.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Setup and then
[Change] of Media for Auto Selection.
3
Select [All Media
Types] or any media
type for paper
selection.
4
Press [OK].
Common Settings - Original Auto Detect Setup
Automatically detect originals of special or non-standard size .
Hagaki
A6
Cancel OK
Status 10/10/2007 10:10
A6/Hagaki
On
OffFolio
On
Off11x15 "
Common Settings - Media for Auto Selection
Select default type of paper for auto paper selection .
Transparency Rough VellumPlain
All Media
Types
Cancel OK
Status 10/10/2007 10:10
PreprintedRecycledLabels Bond Cardstock
LetterheadPrepunc hedColor Envelope T hick
Custom 2Custom 1Hi gh Q uality Cus tom 3 Cus t om 4
Custom 7Custom 6Custom 5 Custom 8

Utax CD 1325 Specifications

General

Brand	Utax
Model	CD 1325
Category	All in One Printer
Language	English