System Menu
ADVANCED OPERATION GUIDE 6-15
6
Paper Source for Cover Paper
Select paper source for cover paper from Cassette 1-4 or Multi Purpose
Tray. Cover is used for Booklet (see page 1-35) and Cover (see page 1-
28) modes.
NOTE: [Cassette 3] and [Cassette 4] are displayed when the optional
side feeder installed.
Use the procedure below to select the paper source for the cover.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Setup and then
[Change] of Paper Source for Cover.
3
Select the paper
source to load cover
paper.
4
Press [OK].
Special Paper Action
When printing on Prepunched, Preprint, and Letterhead, punch-holes
might not be aligned or the print direction might be upside-down depending
on how originals are set and the combination of copying functions. In such
a case, select [Adjust Print Direction] to adjust the print direction. When
paper orientation is not important, select [Speed Priority].
The table below lists the available settings and their details.
Comm on Sett ings - Paper Sourc e f or Cover
Select cassette for cover paper.
Cassette 2
Cassette 1
Cassette 3
Cancel OK
Status 10/10/2007 10:10
Cassette 4
Multi Purpose
Tray
Item Description
Adjust Print Direction Adjust print direction. Print speed is a little
slower. Select this item to print on
Prepunched, Preprint and Letterhead.
Speed Priority Give the job speed top priority and
disregard the paper orientation. Select this
item when paper orientation is not
important.
To Next Page
Loading...
Need help?
General
