Appendix-6 ADVANCED OPERATION GUIDE
Special Paper
This section describes printing onto special paper and print media.
The following paper and media can be used.
• Transparencies
• Preprinted paper
• Bond paper
• Recycled paper
• Thin paper (from 45 g/m
2
to 64 g/m
2
or less)
• Letterhead
• Colored paper
• Prepunched paper
• Envelopes
• Cardstocks
• Thick paper (from 106 g/m
2
to 200 g/m
2
or less)
• Labels
• Coated paper
• High-quality paper
When using these paper and media, choose that are designed specifically
for copiers or page printers (such as laser printers). Use the Multi Purpose
tray for transparencies, thin or thick paper, envelopes, cardstocks, and
label paper.
Choosing Special Paper
Although special paper that meets the following requirements can be used
with the machine, print quality will vary considerably due to differences in
the construction and quality of special paper. Thus, special paper is more
likely than regular paper to cause printing problems. Before purchasing
special paper in volume, try testing a sample to ensure the print quality is
satisfactory. General precautions when printing onto special paper are
given below. Note that we are not responsible for any harm to the user or
damage to the machine caused by moisture or specifications of special
paper.
Select a cassette or Multi Purpose tray for special paper.
Transparencies
Transparencies must be able to withstand the heat of printing.
Transparencies must meet the following conditions.
Criteria Specifications
Heat resistance Must withstand at least 190°C
Thickness 0.100 to 0.110 mm
To Next Page
Loading...
Need help?
General
