Copying Functions
ADVANCED OPERATION GUIDE 1-53
1
Priority Override
Suspends a current job and gives the selected job priority for copying. The
suspended job resumes after Priority Override copying is finished.
NOTE: The current job that is selected as Priority Override cannot be
suspended.
The procedure for using Priority Override is explained below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Advanced Setup] and then [Priority Override].
4
Press [On] to select
Priority Override.
5
Press [OK].
6
Press the Start key. The current copy job is suspended and the copy job
selected in Priority Override starts. The suspended job resumes after
Priority Override copying is finished.
Status 10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Priority Override
Press [OK] to display
Add Shortc ut
Off
Give print job t op priority and com plete it
before returning to other print jobs .
On
1
the image.
To Next Page
Loading...
Need help?
General
