Copying Functions
ADVANCED OPERATION GUIDE 1-21
1
The following 4-in-1 options and output orientations are available.
NOTE: When placing the original on the platen, be sure to copy the
originals in page order.
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1
Press the Copy key.
2
Press [Layout/Edit] and then [Combine].
Original
Document processorPlaten
Orientation of OriginalCopy
None DottedSolid Borders
(Cropmark)
To Next Page
Loading...
