Utax CD 1325

System Menu
6-32 ADVANCED OPERATION GUIDE
4
Press [+] or [–] to
enter the form
density.
5
Press [Select Form].
6
Select the form that
you want to use and
press [OK].
NOTE: Press [Detail] to check File Name, Storing Size (Document size),
Data Size, and Date Stored for the Form.
7
Press [OK].
Form Overlay (Box)
Select the default form and form density from Custom Box for form overlay
for box print jobs.
NOTE: Refer to page 4-28 for Form Overlay (Box).
The table below shows the available settings.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [T] and [Change]
at Form Overlay(Box).
3
Press [Select Stored Form].
Common Settings - Form Overlay(Copy)
Set the default form overlay for copies .
Select
Stored Form
Density(10 - 100 )
100
Off
Cancel OK
Status 10/10/2007 10:10
%
None
Select Form
Select a form.
Date and Ti m e SizeName
Common Settings - Select Form
001/999
Cancel
05/05 /2007 09 :10Document1
Detail
Form for Form Overlay(Copy)
1.1MB
OK
05/05 /2007 09 :20Document2 1 .2 MB
05/05 /2007 09 :30Document3 2 .1 MB
05/05 /2007 09 :40Document4 2 .2 MB
05/05 /2007 09 :50Document5 1 .2 MB