Management
ADVANCED OPERATION GUIDE 7-5
7
Auto Logout
Logout is automatically executed in the following cases:
• When the Power key is pressed to enter the sleep mode
• When auto sleep is activated
• When auto reset is activated
Adding a User
This adds a new user. You can add Up to 1,000 users (including the default
login user name). The table below explains the user information to be
registered.
NOTE: By default, one default user with administrator rights is already
stored. This user's properties are:
User Name: Admin
Login user name: 3060
Login Password: 3060
Access Level: Administrator
It is recommended to periodically change the user name, login user name
and login password regularly for your security.
Use the procedure below to register a new user.
Item Description
User Name*
* Mandatory at user registration.
Enter the name displayed on the user list (up to 32
characters).
Login User
Name*
Enter the login user name to log in (up to 64
characters). The same login user name cannot be
registered.
Login
Password*
Enter the password to log in (up to 64 characters).
Access Level* Select User or Administrator for user access
privileges.
Account Name Add an account where the user belongs. The user,
who registered his/her account name, can log in
without entering the account ID. Refer to Job
Accounting on page 7-11.
E-mail Address The user can register his/her E-mail address. The
registered address will be automatically selected
for subsequent operations that need any E-mail
function.
To Next Page
Loading...
Need help?
General
