Security
ADVANCED OPERATION GUIDE 8-7
8
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [T] and then [Security].
3
If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
“3060”.
4
Enter the security password. By default, the code is set 000000.
5
Press [Data Overwrite Method] of [Change].
6
Press [3-time
Overwrite] (default)
or [Once Overwrite].
7
Press [OK].
Security - Data Overwrite Method
Cancel OK
Status 10/10/2007 10:10
Select data overwrite method.
3-t ime
Overwrite
Once
Overwrite
To Next Page
Loading...
