Copying Functions
1-18 ADVANCED OPERATION GUIDE
XY Zoom
Adjust vertical and horizontal magnifications independently. Enter desired
magnification in 1% increments between 25% and 400%.
* When using the document processor, enter the desired magnification
in 1% increments between 25% and 200%.
The procedure for using zoom copying is explained below.
1
Place the originals in the document processor or on the platen.
2
Press the Copy key.
3
Press [Layout/Edit] and then [Zoom].
4
Press [Auto] to use Auto Zoom.
Press [+] or [–] to change the displayed magnification as desired. You can
also enter the magnification directly using the numeric keys by pressing [#
Keys].
To use Preset
Zoom, select the key
of desired
magnification.
Y
X
Status 10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Zoom
Press [OK] to display
Add Shortc ut
(25 - 400 )
Standard
Zoom
XY Zoom
1
129%
400%
100%
Auto
200%
121%
154%
# Keys
50%
78%
77%
25%
64%
Letter
>>Ledger
Max .
STMT
>>Ledger
Legal
>>Ledger
STMT
>>Legal
Ledger
>>STMT
Legal
>>Letter
Ledger
>>Legal
Min.
Ledger
>>Letter
the image.
To Next Page
Loading...
Need help?
General
