15. Unscrew the AdBlue tank fastening screws.
GUID-245264E1-7DB6-41EC-880E-9301498E7124
1. Fastening screw
The AdBlue tank is fastened with 4 screws.
16. Move the AdBlue tank so that you can reach the front loader frame bolts.
17. Tighten the front loader frame bolts on the left hand side.
GUID-1BA6EF5D-2C92-4850-AD79-2A486E2BD2DA
1. Front loader frame bolt
The tightening torque is 600 Nm.
18. Fit the AdBlue tank.
19. Connect the electric connector and hoses to the tank heating sensor cap.
20. Tighten the AdBlue tank fastening screws.
4. Maintenance
- 342 -
To Next Page
Loading...
Need help?
General
