▪ HID Corporate 1000 35-bit (not evaluated by UL)
▪ HID Corporate 1000 48-bit (not evaluated by UL)
▪ HID/ProxIF 37-Bit
▪ XceedID 40-Bit
▪ Vanderbilt 35-bit (including EV1)
▪ MiFare 32-Bit Serial Number
▪ Communicates via RS-485 protocol
▪ Capable of running in degraded mode, allowing local decision making, if communication fails between the
Reader Interface and bright blue
▪ Can be powered directly from bright blue
▪ OPTIONAL - can be powered locally by a UL294 Listed Power-Limited, Power Supply capable of 4 hours
standby power.
Features
▪ Supports two read-head connections
▪ Connects directly to the communication channels on the bright blue
▪ Includes six 5 amp, form C, single pole/double throw, mechanically latching relays
▪ Eight supervised or unsupervised contact inputs with the ability to support a wide range of end-of-line
resistor values when supervision is being used.
▪ Connection for one multi-color LED for access granted or access denied indication
▪ Connector for one buzzer/annunciator
Specifications
▪ Board Dimensions: 6” W x 8” L x 1” D (152 mm x 203 mm x 25 mm)
▪ Enclosure Dimensions: 10” H x 12” W x 3-1/2” D
▪ Power requirements: 12 – 24 VDC (supplied from the bright blue or external power supply)
▪ Power consumption: 270 – 450mA (depending on input voltage plus nominal reader current to 550 mA)
▪ Ambient temperature: 0º to 70º C or 32º to 158º F
Enclosure
VRI-2 Enclosure – An enclosure with a hinged, screw-down door is included for each VRI-2 board. Tamper
switch, lock and key are available options.
Features
▪ Metal enclosure with hinged door
▪ Enclosure Dimensions: 10” H x 12” W x 3-1/2” D
To Next Page
Loading...
Need help?
General
