C H A P T E R 1
Vanderbilt bright blue Embedded Controller
Overview
The bright blue system is based on the Vanderbilt AP02 controller and is equipped with 10 / 100 Base-T
Ethernet connection with two RS-485 serial ports and two onboard reader interfaces capable of Wiegand or
Magstripe input. It is a Linux application utilizing an atmel ARM926EJ-S 32-bit processor with 400MHz CPU clock,
it also has 256 KB SRAM, 256MB NAND Flash and 128MB SDRAM. User access is via a network connection
using any supported browser that allows a remote connection to manage the system. bright blue communicates
with a series of devices such as the Vanderbilt VBB-RI, VBB-OBRI, VRI-1, VRI-2, VBB-NRI, Schlage AD-300, VIP,
AD-400, NDE Wireless Locks and Wireless readers.
To Next Page
Loading...
