EasyManuals Logo

Vanderbilt bright blue User Manual

Vanderbilt bright blue
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
VBBIM09/33/20 v5.0.3
Chapter 5 VBB-NRI 85
VBB-NRI Pin Functions
P1 - Power source wiring. Used to supply power to the VBB-NRI.
â–ª Pin 1 is Ground
â–ª Pin 2 is RXA and is not used with bright blue
â–ª Pin 3 is TXB and is not used with bright blue
â–ª Pin 4 is Power
P2 - Read head connection.
â–ª Pin 1 through 5 are used to connect to a read head. See the Connecting to Read Head section for
details.
â–ª Pin 6 is RED and is not used with bright blue
â–ª Pin 7 is IBT and is not used with bright blue
P3 - Contact Inputs. The VBB-NRI has four unsupervised contact points. When connecting more than two contact
inputs to Pin 5 (GND), a terminal strip to connect the common ground wires needs to be installed. Unsupervised
door contacts have maximum wire length of 2,000 feet.
â–ª Pin 1 is Exit Request (REX) - Normally Open
â–ª Pin 2 is Door Position Switch (DOD) - Normally Closed
â–ª Pin 3 is Push Button Override - Normally Open
â–ª Pin 4 is Auxiliary Input - Normally Closed
â–ª Pin 5 is Ground
P5/P6 - Relay outputs. The VBB-NRI comes with two relay output.
â–ª Pin 1 - Normally Open
â–ª Pin 2 - Normally Closed
â–ª Pin 3 - Common
W4 - Read head voltage selector. The VBB-NRI read-head voltage selector provides 5VDC or 12VDC to the
various types of read-heads depending on jumper location.
â–ª A jumper across Pins 1 and 2 will provide 12VDC (Default Setting)
â–ª A jumper across Pins 2 and 3 will provide 5VDC
â–ª No jumper will also provide 5VDC
Warning: Serious damage may occur to the read-head if this jumper is set incorrectly. Please check the read-
head voltage requirements.
W9 - Used to disable network functionality. This pin functions differently depending on which version of the VBB-
NRI is in use. See the Verifying Upgrade/Checking Version Number section at the end of this chapter if
you need to determine which version of the VBB-NRI is in use.
VBB-NRI versions 11 and below:
â–ª Pins 1&2 - Enable/Disable onboard web server (Configuration GUI). Enabled by default. If jumpered
together, the onboard web server is disabled.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanderbilt bright blue and is the answer not in the manual?

Vanderbilt bright blue Specifications

General IconGeneral
BrandVanderbilt
Modelbright blue
CategorySecurity Sensors
LanguageEnglish

Related product manuals