Warning: The polarity of Device 1-1 to 2-16 connections has been reversed from the Rev B controller. If
changing from the bright blue Rev B controller to the newer bright blue controllers, the positive and
negative wires need to be reversed for all devices.
Enclosure Installation
bright blue Enclosure - An enclosure with a hinged door and a lock is included with each bright blue system.
The flying leads of the tamper switch should be attached to a UL Listed burglar alarm system or Listed local
siren/annunciator. Do not connect the flying leads to the tamper switch on bright blue.
Features
▪ Metal enclosure with hinged door
▪ The enclosure is provided with a lock and key
▪ The enclosure is outfitted with a tamper switch
▪ Enclosure Dimensions: 14" x 14" x 3.5"
To Next Page
Loading...
