Vanderbilt bright blue User Manual

158 bright blue Installation Manual
3 Click on the Device Options button.
4 Click on the PIM Properties option.
5 Click the Edit tab.
6 Define the PIM400's address by clicking on the RS485 field; this is where the PIM400's address is set. A
numerical keypad will open at the bottom of the screen.
7 Using the keypad, set the address of the PIM400.
8 On the Low Door option, use the up and down arrows to define the low address of the AD-400s that will
communicate with this PIM400.

Vanderbilt bright blue Specifications

General

Brand	Vanderbilt
Model	bright blue
Category	Security Sensors
Language	English