• Select the “ENGAGE” tab once displayed
• Any connected GWE – ENGAGE Gateways should display at the appropriate RS-485 Address
• The configured Low and High NDE Lock Address will be retrieved from the Gateway and displayed
The Discovery Tool will display all Addressing as required by bright blue. ENGAGE Device Addressing is 0-
based while Diagnostics Addressing is 1-based. See GWE – ENGAGE Gateway, NDE Lock and bright blue
Addressing above.
Discovery Tool ENGAGE dialogs auto-refresh. The Default auto-refresh is 5 seconds and is user configurable.
• Click “Configure” to display NDE commissioned and configured locks available for linking.
To Next Page
Loading...
