EasyManuals Logo
Home>Vanderbilt>Security Sensors>bright blue

Vanderbilt bright blue User Manual

Vanderbilt bright blue
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
208 bright blue Installation Manual
Card formats -The card reader can read all card formats up to 255 bits.
Request-to-exit - The sensor/switch is built-in and will be triggered from the activation of the door lever on the
protected side of the door.
Request-to-enter (optional) - The optional sensor/switch is built-in as a momentary switch on the reader.
Strike/Lock - Schlage WA Series Locks provide a way to lock or unlock a door and monitor access from a
remote location. They are fail-safe from the protected side of the door. These locks are controlled by bright blue.
Cylindrical Type WA5200 Series
ANSI Grade 1
Lever Handles
Fits 2 1/8” diameter hole in door
Backset: 2 ¾” standard (2 3/8” available)
Weight: 5.75 lbs.
Door Thickness: For doors 1-3/8” to 2-1/8”
1.2.9.1.1 Latchbolt
A ½” or ¾” with 2 ¾” backset, or ½” with 2-3/8” backset.
Door Position - It monitors an external reed type of switch, a magnetically operated switch provided with the
lockset to determine door position.
Mortise Type WA5600 Series
ANSI Grade 1
Lever Handles
Weight: 8 lbs.
Door Thickness: For doors 1-3/4” to 2-3/4”
Latchbolt - Available with either a ¾” latchbolt or 1” autobolt.
Door Position - A door position monitoring circuit is available. It monitors a integral reed type of switch, a
magnetically operated switch to determine door position.
Operational environment
Temperature: -35°C to +66°C
Humidity: 20% RH to 95% RH (non-condensing)
Power source
The Schlage WA Series Locks uses 8 no-button AA alkaline cells welded together into a battery pack insulated
with a shrink-wrap wrapper. It has two wire leads and a polarized connector compatible with connector from the
WA5200 Series and WA5600 Series PCB.
Operating voltage
Power Requirements: 5.5 to 13.2 VDC
Current Requirements: Standby: 55 micro Amps typical (Proximity version)
Maximum: 400mA peak (transmitting)
Battery Life - The battery pack is capable of providing power for two years with 40,000 card
swipes/presentations per year with a ten-minute heartbeat period. It will provide power for four years at
10,000 card swipes/presentation per year with a 10-minute heartbeat interval or one and a half years at
25,000 card swipes/presentation per year with a one-minute heartbeat interval.
Radio Frequency (RF) - The PIM includes an RF Transceiver.
Spread spectrum

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanderbilt bright blue and is the answer not in the manual?

Vanderbilt bright blue Specifications

General IconGeneral
BrandVanderbilt
Modelbright blue
CategorySecurity Sensors
LanguageEnglish

Related product manuals