Vanderbilt SPC42 Series User Manual

Reader Card Format
MultiClass RP40
MultiClass RP15
MultiClass RPK40
ABP5100-BL
Default 32 bit MiFare Only
IB41-EM
IB42-EM
IB44-EM
IB45-EM ABR5100-BL ABR5100-TG ABR5100-PR
HID Prox Pro 26 bit Wiegand
EPX 36 bit Wiegand
Site codes and restrictions
Reader Format
Side Code
Available
Restrictions
EM4102 No Max card no. 9999999999
COTAG No Max card no. 9999999999
Wiegand 26 bit Yes Max site code. 255
Max card no. 65535
Wiegand 36 bit Yes Max site code. 32767
Max card no. 524287
HID Corporate 1000 Yes Max site code. 4095
Max card no. 1048575
HID 37 No Max card no. 34359738370
HID 37F Yes Max site code. 65535
Max card no. 5242875
HID 37BCD No Max card no. 99999999
HID ICLASS MIFARE No Max card no. 4294967295
HID ICLASS DESFIRE No Encrypted card number.
Max card no. 72 x 10
16
. This number must be learned on the
panel
AR618 WIE BCD 52
BIT
No Max card no. 4294967295
AR618 OMRON 80 BIT No Max card no. 9999999999999
23.21 SPC Support for E-Bus Devices
The SPC E-Bus Gateway (SPCG310) is an X-Bus expander that enables communication between an
SPC controller and Sintony E-Bus devices. Sintony E-BUS addressing permits duplicate addresses for E-
Bus devices across different E-BUS sections. X-Bus devices require unique addresses. To support this
conflict, E-BUS peripheral readdressing may be required. For more information, see Addressing Mode on
page133.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Appendix
© Vanderbilt 2018 390 A6V10276959-d
11.2018

Vanderbilt SPC42 Series Specifications

General

Brand	Vanderbilt
Model	SPC42 Series
Category	Power Supply
Language	English