Table of Contents
Table of Contents 3
1 Meaning of symbols 10
2 Security 11
2.1 Target group 11
2.2 General safety instructions 11
2.2.1 General information 11
2.2.2 Transport 11
2.2.3 Setup 12
2.2.4 Operation 12
2.2.5 Service and maintenance 12
2.3 Meaning of written warning notices and hazard symbols 12
2.3.1 Warning notices 12
2.3.2 Hazard symbols 13
3 Directives and standards 14
3.1 EU directives 14
3.2 Overview of Conformity to EN50131 Standard 14
3.2.1 Compliance with EN50131 Approvals 20
3.3 Compliance with EN 50136-1:2012 and EN 50136-2:2014 22
3.4 Compliance with INCERT Approvals 22
3.5 PD 6662:2010 Conformance Guidelines 23
3.5.1 Product scope 23
3.5.2 Standards overview 24
3.5.3 Methods for the completion of setting and unsetting 24
3.5.4 Configuration requirements for PD 6662:2010 conformance 26
3.5.5 Additional commissioning requirements for PD 6662:2010 conformance 27
3.5.6 Additional information 27
3.6 Compliance with VdS approvals 28
3.7 Compliance with NF and A2P approvals including CYBER requirements 29
3.7.1 Compliance with NF and A2P approvals including CYBER requirements 29
3.7.2 Compliance with NF and A2P approvals including CYBER requirements - SPC Products 30
4 Technical Data 31
4.1 SPC4000 31
4.2 SPC5000 33
4.3 SPC6000 37
4.4 SPCP355.300 40
5 Introduction 42
6 Mounting system equipment 43
© Vanderbilt 2018 3 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
