For naming and identifying, expanders are allocated zones (in groupings of 8) with subsequent
identities of 1 to 512. (The greatest number in zone identification is 512.) Therefore, any expander
named or identified by a number greater than 63 has no allocated zones.
Editing IO Expanders
The following table lists the available options for IO expanders:
Function Description
Description Edit the description of the expander.
Editing Audio Expanders
The following table lists the options available in the Edit menu for Audio Expanders:
Name Description
DESCRIPTION Enter or edit a description for the audio expander.
INPUT Select the zone’s input.
VOLUME LIMIT Select the volume limit.
Editing Wireless Expanders
The following table lists the available options for Wireless expanders:
Function Description
Description Edit the description of the expander.
Editing Analysed IO Expanders
The following table lists the available options for IOA expanders:
Name Description
Description Edit the description of the expander.
Editing Indicator Expander Modules
The following table lists the available options for Indicator Expander modules:
Name Description
DESCRIPTION Enter or edit a description for the expander.
LOCATION Select a location for the expander from the list of available areas.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the keypad
© Vanderbilt 2018 129 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
