Vanderbilt SPC42 Series - User PIN Combinations

23
Appendix
User PIN combinations
344
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Keypad Label SPCK420/421
1
Label on inside of Keypad
2
Pull-down label for providing installer details. Fill in all relevant details when installation is
complete.
23.10 User PIN combinations
The system supports 4, 5, 6, 7 or 8 PIN Digits for each user (User or Engineer
PINs). The maximum number of logical combinations/variations for each number of
PIN digits can be found in the table below.
Number of digits
Number of variations
Last valid user codes
4
10,000
9999
5
100,000
99999
6
1,000,000
999999
7
10,000,000
9999999
8
100,000,000
99999999
The maximum number of logical combinations/variations is calculated by:
10
No of digits
= Number of variations (including the User or Engineer PIN)
Note: To comply with INCERT approvals, the user’s PIN code must contain more
than 4 digits.
The default Engineer PIN is 1111. See Engineer PINs [➙ 102] for more details.