Vanderbilt SPC42 Series User Manual

Name: Vanderbilt SPC42 Series
Brand: Vanderbilt
Rating: 4 (1 reviews)

402 pages

To Next Page

To Previous Page

Number Description

5 Tamper switch contact open

If the housing is removed from the wall or displaced, the tamper bracket screw is no longer secure

against the wall, causing the bracket to pivot. This in turn causes the tamper switch to swivel away

from the lid and opens the switch contact.

WARNING: If the tamper bracket screw is not secure against the wall, then tamper protection is

compromised.

6.3.3 Installing the batteries

If using two batteries in the G5 housing, it is recommended that both batteries should be the same

Ah rating.

Number Description Number Description

1 Battery 6 Battery temperature lead

2 Fixing strap 7 PSU

3 Battery fixing tabs 8 Optional expander positions

4 Strap holes 9 Controller

5 Battery leads 10 Antenna

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Mounting system equipment

11.2018

Questions and Answers:

Need help?

Do you have a question about the Vanderbilt SPC42 Series and is the answer not in the manual?

General