1. Enter a Site Code, if required, for all cards assigned to this user profile. See Supported card readers
and card formats on page388.
2. Select the Access rights of this user profile for the doors configured on the system. Options are:
- No access
- No time limit (that is, 24 hour access)
- Calendar (if configured)
3. Users using this User Profile
A list of users assigned to this profile is displayed. Click a user to view or edit the user’s details.
You can create a new user profile based on an existing profile by clicking Replicate. A new User Profile
page is displayed.
See also
Adding/Editing User Profiles on page199
Adding/Editing an area on page270
17.8.3 Configuring SMS
The SPC system allows remote (SMS) messaging on systems with installed modems.
Prerequisites
o
A modem is installed and identified by the system.
o
The function SMS Authentication is activated. (See Options on page252.)
1. Select Users>Users SMS.
The Engineer SMS ID and a list of user SMS IDs with corresponding SMS details are displayed.
2. Click the Test button to test an SMS number.
3. Click Add to add a new SMS ID or click the Editicon beside the required SMS ID.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 203 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
