3 Directives and standards
This chapter covers:
3.1 EU directives 14
3.2 Overview of Conformity to EN50131 Standard 14
3.3 Compliance with EN 50136-1:2012 and EN 50136-2:2014 22
3.4 Compliance with INCERT Approvals 22
3.5 PD 6662:2010 Conformance Guidelines 23
3.6 Compliance with VdS approvals 28
3.7 Compliance with NF and A2P approvals including CYBER requirements 29
3.1 EU directives
This product complies with the requirements of the European Directives 2004/108/EC “Directive of
Electromagnetic Compatibility”, 2006/95/EC “Low Voltage Directive”, and1999/5/EC on Radio and
Telecommunications Terminal Equipment (R&TTE). The EU declaration of conformity is available to the
responsible agencies at http://pcd.vanderbiltindustries.com/doc/SPC
European Directive 2004/108/EC “Electromagnetic Compatibility”
Compliance with the European Directive 2004/108/EC has been proven by testing according to the
following standards:
emc emission EN 55022 Class B
emc immunity EN 50130-4
European Directive 2006/95/EC “Low-Voltage Directive”
Compliance with the European Directive 2006/95/EC has been proven by testing according to the
following standard:
Safety EN 60950-1
3.2 Overview of Conformity to EN50131 Standard
This section gives an overview of the SPC compliance to the EN50131 standard.
Address of Certifying Body
VdS (VdS A/C/EN/SES Approval)
AG Köln HRB 28788
Sitz der Gesellschaft:
Amsterdamer Str. 174, 50735 Köln
Geschäftsführer:
Robert Reinermann
JörgWilms-Vahrenhorst (Stv.)
© Vanderbilt 2018 14 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
