Vanderbilt SPC42 Series User Manual

Door
Mode
Specifies the door operate mode.
Performable actions
Refresh Updates the door summary.
Log Displays a log of events for the selected door.
Lock Locks the selected door.
Unlock Unlocks the selected door.
Normal Returns the door to normal system control.
Momentary Unlocks the door for one timed interval.
17.6.6 FlexC Status
This page displays the status of each ATS configured on your system.
1. To view the status of an ATS, go to Status > FlexC.
2. The table below describes the status criteria available for each ATS.
ATS
Registration
ID
The unique registration ID of the ATS allows the panel to be uniquely
identified at the RCT.
ATS Status The status of the ATS, for example, initializing.
Time since
last poll
The time since the last poll on any ATP in the ATS.
Event
Queue
Count
Number of events in the event queue waiting to be transmitted.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 192 A6V10276959-d
11.2018

Vanderbilt SPC42 Series Specifications

General

Brand	Vanderbilt
Model	SPC42 Series
Category	Power Supply
Language	English