Vanderbilt SPC42 Series User Manual

Command Filter Commands
FlexC Commands Get the status of a FlexC ATS
Get the Network Log for a FlexC ATS
Get the Event Log for a FlexC ATS
Get the log for a FlexC ATP
Get the Network log for a FlexC ATP
Export a FlexC ATS configuration file
Import a FlexC ATS configuration file
Delete a FlexC ATS
Delete a FlexC ATP
Delete a FlexC Event Profile
Delete a FlexC Command Profile
Request a testcall for a FlexC ATP
Access Control Commands Get the Configuration for a Door
Read the Status for a Door
Control a Door
Get the Access Log
Verification Commands Read a Camera Image
Get the Status of a Verification Zone
Get the data for a Verification Zone
Send data to a Verification Zone
Virtual Keypad Commands Control keypad
File Commands Upgrade the Panel Firmware
Upgrade Peripheral Firmware
Upload Peripheral Firmware
Upgrade PFW Progress
Upload a File
Download a File
Saves the Panel Configuration
Reset the Panel
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Appendix
© Vanderbilt 2018 396 A6V10276959-d
11.2018

Vanderbilt SPC42 Series Specifications

General

Brand	Vanderbilt
Model	SPC42 Series
Category	Power Supply
Language	English