BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 98 -
Selecting SMDR Transmit Rate (continued)
• Example of Column Headings in the Report
• The system generates a carriage return (CR) after each record output.
• After you have set up SMDR, be sure to assign SMDR to individual extensions as needed.
HINT
Remember to review “Programming Extensions for SMDR Output” on page 427.
Selecting SMDR Transmit Rate (continued on next page)
HEADING DEFINITION
D Call Direction
In this first position you may also see...
I Incoming
O Outgoing
A Operator transferred call
H Recalled trunk call
L Conference call
EXT
Extension number/Incoming DISA CO line number/Incoming ECF CO line
number
TRK CO line directory number
DGT_DIALED Telephone number (outgoing call only, maximum 16 digits, left aligned)
RING CO line incoming ringing duration before answer (incoming call only)
DATE Day/Month (DD/MM)
TIME Start time of call connection
MM Minute
HH Hour
SS Second
DURATION Length of the call
ACCOUNT Account code entered for billing purposes (maximum 8 digits, left aligned)
To Next Page
Loading...
