- 121 -
DX-120 Programming Manual BASIC CO LINE PROGRAMMING TASKS
Setting the Day and Evening Class of Services (COS)
and Music On Hold (MOH) Source
The DX-120 allows you to assign a different class of service for day mode and evening mode.
Whenever a CO line is placed on hold, the system plays programmed music. If you need background music or music
on hold, you must connect the music channels to some music source.
CO lines that are placed on hold are connected to one of two external music sources. The DX-120 system provides
two sources of MOH, since the system may be installed in a location that serves two separate businesses and MOH
requirements.
As an alternative, the system can play a “tone” to callers while on hold. If neither of the two music channels is
connected to a music source, or if the music sources are not intended for the MOH function, you can use the beep tone
to signify to callers on hold that their call is still holding. The tone duration is one second, and repeats every 4 seconds.
NOTE
To use the internal music tone, the MUSIC option strap (JPC1) must be connected to
the INT position on the CPM board. For further details on connecting MOH sources,
see the DX-120 Technical Manual, Volume I, Installation and Maintenance.
SETTING DAY AND EVENING COS AND MOH SOURCE VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXC. O. Line to display the C. O. Line screen.
Setting Day and Evening COS and MOH Source via PC-DBA (continued on next page)
To Next Page
Loading...
