- 37 -
DX-120 Programming Manual SHORTCUTS THAT HELP YOU WORK FASTER
Feature / Directory Number Lookup (continued)
FIND A SUFFIX CODE
1) Press suffix to display a list of digits dialed after system resource directory numbers displays (see page
474 for a listing of the default suffix codes).
2) Press next (and/or back) to move through the list until you see the suffix you want to select.
AND/OR
Press Hold to go back to a previous screen level.
When you find the number you want to use:
3) Press the button that corresponds to the suffix you want to select.
Resetting an Extension to the Default Set
When extension users have invoked several features on their extensions, it may be necessary to clear all settings and
return the telephone set to the factory condition. The Default Set code is used to perform this operation.
The following extension parameters are reset to the value shown:
• LNR = empty
• SNR = No Saved Number
• Memo = No Saved Number
• Telephone Lock = No
• Auto Hold = No
• Page Receive = Yes
• Busy Ring = Yes
• Hotline to = NULL (none)
To return an extension’s settings to the default settings:.
1) Press Feature 6 9 to display the prompt:
2) Press go to load the default set into the phone.
• You will hear the confirmation tone when the operation is complete.
To Next Page
Loading...
