- 451 -
DX-120 Programming Manual BASIC EXTENSION PROGRAMMING TASKS
Feature Key Reset
You can clear all the feature key custom settings and reset all buttons to the default settings. See Appendix B, Button
Labeling for the default feature key configuration.
LOOKING UP CODES USING THE DET
NOTE
This operation cannot be performed using the PC-DBA.
While the extension is idle (no call activity).
1) Press Feature 5 8 to display the prompt for the password.
PSWD :_
bksp show chg
2) Enter the extension password.
3) Press show to display the prompt for confirmation:
FTR KEY RESET
go
4) Press go to resets all the feature keys to the default settings (see 442).
• You will hear a confirmation tone to let you know the reset has been successful.
To Next Page
Loading...
