- 285 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Ring On Recognition Time Interval
The DX-120 allows you to control the length of time (in milliseconds) that ring voltage needs to be present on a line for
the system to classify it as valid ringing.
SETTING RING ON RECOGNITION TIME INTERVAL VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXCall HandlingXTiming to display the Call Handling—Timing screen.
In the Ring On Recognition field in the top right side of the screen:
2) Select the minimum length of ring time you want the system to recognize.
• Valid options are between 50 and 1500 milliseconds, in intervals of 50 (50, 100, 150, 200, etc.).
• The default is 100 milliseconds.
Setting Ring On Recognition Time Interval via PC-DBA (continued on next page)
To Next Page
Loading...
