UPGRADING AN EXISTING SYSTEM DX-120 Programming Manual
- 8 -
Programming a New System (continued)
SETTING UP THE SYSTEM FEATURES FOR SYSTEM ADMINISTRATION AND RESOURCES
The system features allow you to control system administration and to assign system resources. Perform the following
tasks.
HINT
Details on how to perform these tasks are included in see “Overview” . The DX-120
provides programmable features that allow you to establish these various settings.
• Establish the database administrator password - see page 16
• Assign the attendant extension for each tenant group - see page40
• Assign the system reminder for each tenant group - see page45
• Set up the system time, date, and hour mode - see page49
• Set up the ring scheme - see page55
• Name each CO line - see page58
• Set up the pre-programmed incoming and outbound messages - see page60
• Program speed dial numbers - see page64
• Set the number of items in the Caller ID table - see page72
• Establish the music source for the each tenant group - see page83
• Assign the external pager ID to a tenant group - see page77
• Program ancillary devices - loud bell, external page, music on hold source - see page87
• Allocate the DSS - see page89
• Set up the optional internal modem - see page93
• Select the PC-DBA transmit rate - see page95
• Select the SMDR transmit rate - see page97
• Set up the numbering plan you want to use Set the user passwords and names for extensions - see page103
• Specify the letter type - see page476
• Set the user passwords and names for extensions - see page387
To Next Page
Loading...
