- 221 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Up Dial Wait Time and Dial Delay via PC-DBA (continued)
1) Go to ProgrammingXCall HandlingXTiming to display the Call Handling—Timing screen.
In the Dial Wait Time field in the top left side of the screen:
2) Select settings for the fields as described below:
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Setting Up Dial Wait Time and Dial Delay (continued on next page)
IN THIS FIELD... SELECT...
Dial Wait Time
The length of time that you want the system to wait before outputting DTMF
tones.
• Valid choices are 0 - 8 seconds.
• The default is 0 seconds.
Dial Delay Time
The length of delay before the system presents dial tone to the extension
user.
• Valid choices are 100, 300, 1000, 1500, and 2000 milliseconds.
• The default is 100 milliseconds.
To Next Page
Loading...
