BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 242 -
Setting Conference Talk Time Intervals and Conference Tones via PC-DBA (continued)
1) Go to ProgrammingXCall HandlingXTiming to display the Call Handling—Timing screen.
From the Meet Me Conference Talk Time field:
2) Select the length of time that you want the system to allow for Meet Me Conferences.
• The valid range is from 0 to 120 minutes, in 10 minute increments.
• The default is 0 (unlimited).
When you are finished setting the Meet Me Conference Talk Time:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
Setting Conference Talk Time Intervals and Confernce Tones via PC-DBA (continued on next page)
To Next Page
