BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 248 -
Setting Up Alarm Play Intervals via PC-DBA (continued)
1) Go to ProgrammingXCall HandlingXTiming to display the Call Handling—Timing screen.
In the Extension Alarm Play Time field in the top center of the screen:
2) Select the frequency with which you want the system to repeat the alert tone when the set alarm time is
reached.
• Valid options are 10 - 600 seconds.
• The default is 30 seconds.
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Setting Up Alarm Play Intervals (continued on next page)
To Next Page
Loading...
