- 255 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Enabling/Disabling TSI Connection (continued)
ENABLING/DISABLING TSI CONNECTION VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-22.
5) Press save to advance to the TSI Connection programming screen.
6) Press chg to select whether or not you want the system to ignore the toll restrictions (Y/N).
• The default is yes (Y).
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
To Next Page
Loading...
