Vertical comdial DX-120 - Page 430

BASIC EXTENSION PROGRAMMING TASKS DX-120 Programming Manual
- 422 -
Setting Up Paging Privileges via the DET (continued on next page)
Assign paging groups to extensions:
From the DB Item Select screen (see steps 1 through 3 on page 421):
8) Enter 01-XXX-04 (where XXX is the extension: 101~204).
9) Press save to display the Paging Group screen for the extension you specified.
10) Press chg until you see the appropriate paging group for this extension.
• Valid choices are paging groups 1 through 8.
• The default is paging group 1.
HINT
Set the Paging Groups for other extensions (as needed) using the steps above.
11) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).