- 431 -
DX-120 Programming Manual BASIC EXTENSION PROGRAMMING TASKS
Assigning a Port Type via PC-DBA (continued)
1) Go to ProgrammingXExtension to display the Extensions screen.
2) Select the extension number you want to program.
3) Select EXT., V.A., or V.M in the Port Type field.
• Use Voice Announce (VA) if this directory number is connected to a recording device, Voice Mail (VM) if
this directory number is connected to voice mail, or extension (EXT) if this directory number is
connected to an extension.
• The default is EXT.
• The default for extensions 157 through 164 is VM, since these extensions are reserved for the in-skin
voice mail.
4) Click the Update button to enter and save your settings into the database on your local disk.
• Program other port types as needed using the steps above.
When all assignments have been made:
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
Once all database changes have been completed:
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Assigning a Port Type (continued on next page)
To Next Page
Loading...
