APPENDIX F - T1 MAINTENANCE
- 484 -
T1 ERROR SECONDS TOTAL
This feature generates a report which allows you to review any errors registered as per the T1 Error Threshold setting.
IMPORTANT!
• The PC-DBA and the switch MUST BE CONNECTED before you can complete
this task.
• Contact Vertical Technical Support for assistance with understanding and clearing
errors.
1) Connect PC-DBA to the switch.
From the PC-DBA main screen:
2) Go to MaintenanceXT1 MaintenanceXError Seconds Total to initiate the report.
IMPORTANT!
• Please be patient. Depending upon the size of your system, as well as the way the
Error Thresholds (see page
483) are set, this process could take several seconds
to several minutes.
• Contact Vertical Technical Support for assistance with understanding and
correcting errors.
HINT
You can click Refresh to get a real time listing of errors (registered since you
previously ran the report).
3) Click Close to close the Error Seconds Totals feature.
To Next Page
Loading...
