- 71 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Programming Speed Dial Numbers via the DET (continued)
10) Press save to display the speed dial number and the new contents.
11) Press next.
12) Press chg to select the C.O. Group you want to associate with this speed dial.
• The default is 1.
• Use the steps above to program other system speed dials as needed.
13) Press next to complete the setting.
• Repeat the steps above for each tenant group for which you want to program speed dial numbers.
When you are finished programming the system speed dials numbers:
14) Press the Hold button to return to the previous menu level.
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
To Next Page
Loading...
