Vertical comdial DX-120 - Page 84

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 76 -
Programming CID Names and Assignments Table via the DET (continued)
18) Enter 04-10-3-01.
19) Press save if you want to increase the number of Caller ID numbers allowed for tenant group 3.
OR
Enter 04-10-3-02.
20) Press save if you want to decrease the number of Caller ID numbers allowed for tenant group 3.
21) Press the Hold button to return to the previous menu level.
OR
22) Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).