Vertiv Liebert APM2 User Manual

4.1.3 Recommended CSA of UPS cable 34
4.1.4 Selection of UPS I/O switch 34
4.1.5 Distance between the UPS connection point and floor 34
4.1.6 General information 35
4.1.7 Power cable connecting terminal 35
4.1.8 Protective ground 35
4.1.9 External protective devices 35
4.1.10 Power cable connection steps 37
4.2 Wiring of Signal Cable 41
4.2.1 Overview 41
4.2.2 Dry contact port X6 J3 42
4.2.3 Dry contact port X6 J22 44
4.2.4 Output dry contact X7 J1 (option) 45
4.2.5 Output dry contact X7 J2 (option) 46
4.2.6 Output dry contact X7 J3 (option) 47
4.2.7 REPO port 47
4.2.8 Host communication port 48
4.2.9 Parallel and LBS communication ports 49
4.2.10 Vertiv™ Liebert® IntelliSlot™ port 49
4.2.11 BMS module port 50
4.2.12 Signal cable connection steps 51
4.3 Built-in Lead-acid Battery Module Installation 51
5 Operator Control and Display Panel 53
5.1 Introduction 53
5.2 Navigating through the Vertiv™ Liebert® APM2 Touchscreen 54
5.2.1 Access level login 54
5.2.2 Vertiv™ Liebert® APM2 touchscreen control panel components 55
5.2.3 Menu 56
5.3 Operation 61
5.3.1 Login to the Vertiv™ Liebert® APM2 touchscreen control panel 61
5.3.2 Customizing the display 62
5.3.3 Operator controls 68
5.4 Viewing UPS Status 75
5.4.1 Viewing UPS data with the status gauge 75
5.4.2 Viewing UPS data with the status panel 79
5.4.3 Logs alarms and events 84
5.5 Viewing UPS Component Status 86
5.6 Status Bar Component 89
5.6.1 Status bar messages 89
5.7 Alarm List 93
ii Proprietary and Confidential ©2023 Vertiv Group Corp.
Vertiv™ Liebert® APM2 30 to 120 kVA Modular UPS User Manual

Vertiv Liebert APM2 Specifications

General

Brand	Vertiv
Model	Liebert APM2
Category	UPS
Language	English